Coolant capacity for the John Deere 245 is 14 gal (53 L). For coolant type, the listing shows John Deere Cool-Gard II.
John Deere 245 Coolant Capacity Specs
| Coolant capacity | 14 gal (53 L) |
|---|---|
| Coolant type | John Deere Cool-Gard II |
| Engine horsepower | 14 hp |
| Engine displacement | 25.8 cu in (0.42 L) |
John Deere 245 Coolant Capacity Guide
Coolant capacity guide
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere 245 Coolant Service Notes
| Coolant capacity note | For the John Deere 245, the coolant capacity is 14 gal (53 L). That is the buying and refill guide for a full cooling-system service |
|---|---|
| Coolant service note | A proper coolant change on the John Deere 245 means using the 14 gal (53 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II |
| Coolant type note | For the John Deere 245, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use |
| Refill check | For the John Deere 245, 14 gal (53 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system |
| Engine context | The engine context for the John Deere 245 is engine horsepower 14 hp and engine displacement 25.8 cu in (0.42 L). Use this for comparison only; the refill amount is the coolant capacity above |
John Deere 245 Coolant Capacity FAQ
What is the John Deere 245 coolant capacity?
The listed coolant amount for the John Deere 245 is 14 gal (53 L). It is a refill guide, not a reason to ignore the actual level marks
Which coolant is listed for the John Deere 245?
The John Deere 245 is listed with John Deere Cool-Gard II coolant guidance. If topping up, match the existing coolant type instead of mixing random antifreeze
What should I check after refilling coolant in the John Deere 245?
After refilling the John Deere 245, run the engine to operating temperature, let it cool and recheck the radiator or overflow level. Air pockets can make the level drop
Is a coolant top-up enough before using the John Deere 245?
A top-up is only a level correction. A flush is the better choice if the John Deere 245 has rusty coolant, oil contamination, mixed coolant types or repeated overheating
What if I do not know what coolant is already in the John Deere 245?
If the existing coolant in the John Deere 245 is unknown, the safer service path is a drain/flush and refill using coolant compatible with John Deere Cool-Gard II
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.







