For the John Deere 57, coolant capacity is 14 gal (53 L). Coolant choice is listed as John Deere Cool-Gard II, with The recommended coolant for a John Deere 56 tractor is John Deere Cool-Gard II, which is guidance.
Coolant capacity14 gal (53 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for a John Deere 56 tractor is John Deere Cool-Gard II, which isFreeze/boil protection
John Deere 57 Coolant Capacity Specs
Coolant capacity
14 gal (53 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for a John Deere 56 tractor is John Deere Cool-Gard II, which is
Engine horsepower
7 hp
Engine displacement
15 cu in (0.25 L)
John Deere 57 Coolant Capacity Guide
Coolant capacity guide
This model
14 gal
Class low
0.8 gal
Class typical
2.5 gal
Class high
5 gal
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere 57 Coolant Service Notes
Coolant capacity note
The John Deere 57 coolant capacity is 14 gal (53 L). Treat it as a cooling-system amount, not a radiator-only top-up amount
Coolant service note
For a full coolant service on the John Deere 57, plan around 14 gal (53 L) and match the listed coolant guidance: John Deere Cool-Gard II and The recommended coolant for a John Deere 56 tractor is John Deere Cool-Gard II, which is
Coolant type note
The John Deere 57 coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere 57 is The recommended coolant for a John Deere 56 tractor is John Deere Cool-Gard II, which is. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere 57, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
For comparison, the John Deere 57 engine details listed here are engine horsepower 7 hp and engine displacement 15 cu in (0.25 L). The coolant capacity remains the service number to use for refilling
John Deere 57 Coolant Capacity FAQ
How much coolant is needed for a John Deere 57 coolant change?
Plan around 14 gal (53 L) when servicing coolant on the John Deere 57. Recheck the system when cool because air pockets can lower the level
Can I use John Deere Cool-Gard in the John Deere 57?
Coolant type for the John Deere 57 is listed as John Deere Cool-Gard II. If the system has been filled with something else before, confirm compatibility before mixing
What coolant mix is listed for the John Deere 57?
The John Deere 57 coolant mix guidance is The recommended coolant for a John Deere 56 tractor is John Deere Cool-Gard II, which is. Keep the mix consistent when topping up so freeze and boil protection stay in range
Should I bleed air after changing coolant in the John Deere 57?
Yes. Use the 14 gal (53 L) figure as the refill guide, but always recheck level after warm-up and cool-down because trapped air can move through the system
When should I flush the John Deere 57 cooling system?
If the John Deere 57 coolant is only slightly low and otherwise clean, topping up with compatible coolant can be enough. If condition is poor, drain and refill instead
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
