For the John Deere 7R 250, coolant capacity is 9.51 gal (36 L). Coolant choice is listed as John Deere Cool-Gard II, with The recommended coolant type for the John Deere 7R 250 tractor is John Deere Cool-Gard guidance.
Coolant capacity9.51 gal (36 L)Cooling system refill amount
Antifreeze mixThe recommended coolant type for the John Deere 7R 250 tractor is John Deere Cool-GardFreeze/boil protection
John Deere 7R 250 Coolant Capacity Specs
Coolant capacity
9.51 gal (36 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant type for the John Deere 7R 250 tractor is John Deere Cool-Gard
Engine horsepower
250 hp
Engine displacement
415 cu in (6.8 L)
John Deere 7R 250 Coolant Capacity Guide
Coolant capacity guide
This model
9.51 gal
Class low
8 gal
Class typical
13 gal
Class high
18 gal
Compared with a broad 7 series guide, not the full tractor dataset.
John Deere 7R 250 Coolant Service Notes
Coolant capacity note
For the John Deere 7R 250, the coolant capacity is 9.51 gal (36 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
For a full coolant service on the John Deere 7R 250, plan around 9.51 gal (36 L) and match the listed coolant guidance: John Deere Cool-Gard II and The recommended coolant type for the John Deere 7R 250 tractor is John Deere Cool-Gard
Coolant type note
The John Deere 7R 250 coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere 7R 250 is The recommended coolant type for the John Deere 7R 250 tractor is John Deere Cool-Gard. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere 7R 250, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
The engine context for the John Deere 7R 250 is engine horsepower 250 hp and engine displacement 415 cu in (6.8 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere 7R 250 Coolant Capacity FAQ
How many litres of coolant does the John Deere 7R 250 take?
The cooling system capacity for the John Deere 7R 250 is 9.51 gal (36 L). This is the main refill figure for a drain, flush or coolant change
What coolant chemistry should the John Deere 7R 250 use?
For the John Deere 7R 250, the coolant type is listed as John Deere Cool-Gard II. Avoid mixing incompatible coolant products
What mix ratio should I use when refilling the John Deere 7R 250?
For the John Deere 7R 250, the coolant mix is listed as The recommended coolant type for the John Deere 7R 250 tractor is John Deere Cool-Gard. Do not dilute the system with too much plain water
How do I avoid air pockets when refilling the John Deere 7R 250 coolant?
Fill the John Deere 7R 250 slowly, run it with the heater/thermostat cycle where applicable, let it cool and check the level again. That helps catch trapped air
Should old coolant be drained from the John Deere 7R 250?
Flush the John Deere 7R 250 cooling system if the coolant is dirty, contaminated, badly diluted or overdue for service. A simple top-up does not fix old coolant chemistry
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
