The John Deere 2210 has a 3-point hitch lift capacity of 700 lb (318 kg) at 24 in / 610 mm behind the hitch. It also lists hitch category Category 1 / Limited Category 1 and rear PTO power 21.5 hp.
Best rear lift figure700 lb (318 kg)
Lift at 24 in / 610 mm700 lb (318 kg)
Hitch categoryCategory 1 / Limited Category 1
Rear PTO horsepower21.5 hp
John Deere 2210 3-Point Hitch Lift Capacity
3-point hitch lift capacity
700 lb (318 kg)
Lift capacity at hitch ends
700 lb (318 kg)
Lift capacity at 24 in / 610 mm
700 lb (318 kg)
Hitch category
Category 1 / Limited Category 1
3-point hitch type
limited-category 3-point hitch
Rear PTO horsepower
21.5 hp
Operating weight
1,400 lb (635 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
700 lb
Average
8,101 lb
Low
550 lb
High
29,750 lb
Lift at 24 in comparison
This model
700 lb
Average
7,292 lb
Low
550 lb
High
29,750 lb
Hitch-end lift comparison
This model
700 lb
Average
7,119 lb
Low
700 lb
High
20,000 lb
Rear PTO horsepower comparison
This model
22 hp
Average
132 hp
Low
11 hp
High
620 hp
John Deere 2210 Hitch and Rear Lift Notes
Rear lift capacity note
The John Deere 2210 rear hitch spec points to 700 lb (318 kg) for lift at 24 in / 610 mm. Use that number before assuming a heavy rear implement will lift safely
24 in / 610 mm lift note
Use the 24 in / 610 mm number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch-end lift note
The John Deere 2210 lists 700 lb (318 kg) at the hitch ends. That is useful, but the 24-inch number is normally better for real implement comparisons when available
Hitch category note
The hitch category, Category 1 / Limited Category 1, is not just a label. It controls what size implements the John Deere 2210 is designed to connect to
PTO and weight context
Rear lift tells you what the hitch can raise, while PTO horsepower and tractor weight tell you more about whether the setup makes sense. For this model, rear PTO horsepower is 21.5 hp and operating weight is 1,400 lb (635 kg)
Rear implement matching
The practical reason to check rear lift on the John Deere 2210 is implement fit. Think small rear blade, carryall, light ballast box, small landscape rake, and light mower, then compare actual implement weight
John Deere 2210 3-Point Hitch FAQ
How much can the John Deere 2210 rear 3-point hitch lift?
The main rear-lift number captured for the John Deere 2210 is 700 lb (318 kg). Use that as the first-pass number for rear implements, not as a front-loader rating.
Why are there two rear lift capacity numbers?
The John Deere 2210 can show different lift ratings depending on where the load is measured. Here, 700 lb (318 kg) is at the hitch ends, while 700 lb (318 kg) is behind the hitch, which is usually the more realistic implement number.
What hitch category is the John Deere 2210?
The John Deere 2210 is listed with Category 1 / Limited Category 1 and limited-category 3-point hitch. Match implements to that category first, then check the 700 lb (318 kg) lift figure.
What rear implements can the John Deere 2210 lift?
Use the 700 lb (318 kg) rating at 24 in / 610 mm behind the hitch as the first filter for implements such as small rear blade, carryall, light ballast box, small landscape rake, and light mower. Also check hitch category Category 1 / Limited Category 1, rear PTO power 21.5 hp, and operating weight 1,400 lb (635 kg) before choosing the implement.
What other specs matter besides John Deere 2210 hitch lift?
Rear PTO horsepower (21.5 hp) and operating weight (1,400 lb (635 kg)) matter because a tractor can sometimes lift more than it should comfortably run or carry in rough conditions.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official deere.com website for official information before buying or lifting heavy implements.
