John Deere X570 Dimensions, Length, Width & Height

Quick answer:

The John Deere X570 is 30.8 in wide and 46.1 in tall.

Width30.8 in (2 ft 6.8 in) / 782.3 mm
Height46.1 in (3 ft 10.1 in) / 1,170.9 mm

John Deere X570 Dimensions

Overall width 30.8 in (2 ft 6.8 in) / 782.3 mm
Overall height 46.1 in (3 ft 10.1 in) / 1,170.9 mm
Rear tread width 30.8 in (2 ft 6.8 in) / 782.3 mm

Tractor Size Comparison Chart

Overall width comparison

This model

30.8 in

Average

70 in

Low

20 in

High

176 in

Overall height comparison

This model

46.1 in

Average

79.8 in

Low

36 in

High

156 in

John Deere X570 Extra Dimension Notes

Storage fit note The John Deere X570 storage check is fairly forgiving compared with bigger farm tractors. With width 30.8 in (2 ft 6.8 in) / 782.3 mm and height 46.1 in (3 ft 10.1 in) / 1,170.9 mm, the door opening is the main issue.
Fitment note The John Deere X570 listed measurements are width at 30.8 in (2 ft 6.8 in) / 782.3 mm and height at 46.1 in (3 ft 10.1 in) / 1,170.9 mm. If one number is close to your opening size, assume you need more clearance.
Tread width note The John Deere X570 shows 30.8 in (2 ft 6.8 in) / 782.3 mm for rear tread width. Front tread was not captured cleanly.

Storage Tips

  • Garage-style storage may work, but judge it against 7 ft high and 8 ft wide, not the exact tractor dimensions.
  • Measure the lowest overhead point, not the tallest part of the shed roof.
  • Expect large shed requirements, especially with duals, tracks or implements fitted.

Storage FAQ

Will it fit in a garage?

The tractor itself is 30.8 in wide and 46.1 in tall. For storage, that means the opening should be closer to 7 ft high and 8 ft wide, with about the tractor length plus attachment room of usable depth.

What size door should I check?

Do not size the door to exactly 46.1 in by 30.8 in. For this model, use about 7 ft height and 8 ft width, then allow the tractor length plus attachment room depth for the length not captured tractor length.

Do attachments change the storage size?

Yes. A tight bay should be planned around the attached setup. For this very large farm tractor, allow about 8 ft to 15 ft extra depth if gear stays on.

How much maneuvering room should I allow?

Wheelbase was not captured for this row, so use the length not captured overall length and 30.8 in width as the parking guide. About a clear straight approach before the doorway of straight approach is the safer target.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.