The John Deere GX325 is 72.2 in long, 39 in wide, and 43.6 in tall.
Length72.2 in (6 ft 0.2 in) / 1,833.9 mm
Width39 in (3 ft 3 in) / 990.6 mm
Height43.6 in (3 ft 7.6 in) / 1,107.4 mm
John Deere GX325 Dimensions
Overall length
72.2 in (6 ft 0.2 in) / 1,833.9 mm
Overall width
39 in (3 ft 3 in) / 990.6 mm
Overall height
43.6 in (3 ft 7.6 in) / 1,107.4 mm
Rear tread width
23 in (1 ft 11 in) / 584.2 mm
Tractor Size Comparison Chart
Overall length comparison
This model
72.2 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
39 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
43.6 in
Average
79.8 in
Low
36 in
High
156 in
John Deere GX325 Extra Dimension Notes
Size class note
The John Deere GX325 is a small compact tractor for size comparisons. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The John Deere GX325 can be treated as a tighter-storage tractor. With length 72.2 in (6 ft 0.2 in) / 1,833.9 mm, width 39 in (3 ft 3 in) / 990.6 mm, and height 43.6 in (3 ft 7.6 in) / 1,107.4 mm, check ROPS/cab height and loader length.
Fitment note
The John Deere GX325 footprint is shown by length at 72.2 in (6 ft 0.2 in) / 1,833.9 mm, width at 39 in (3 ft 3 in) / 990.6 mm, and height at 43.6 in (3 ft 7.6 in) / 1,107.4 mm. These are the numbers that matter in real storage planning.
Tread width note
The John Deere GX325 rear tread figure is 23 in (1 ft 11 in) / 584.2 mm. This is useful, but not the full wheel-stance picture.
Storage Tips
Compact size helps, but a loader or mower can still make the parked footprint much bigger.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 43.6 in tall or 39 in wide, count it as too tight. The safer check for the John Deere GX325 is around 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
The clean check is 7 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 43.6 in height, 39 in width and 72.2 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 43.6 in for overhead clearance, 39 in for side clearance and 72.2 in for bay depth.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 72.2 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
