The John Deere 8225R is 276 in long, 108 in wide, and 132 in tall.
Length276 in (23 ft 0 in) / 7,010.4 mm
Width108 in (9 ft 0 in) / 2,743.2 mm
Height132 in (11 ft 0 in) / 3,352.8 mm
John Deere 8225R Dimensions
Overall length
276 in (23 ft 0 in) / 7,010.4 mm
Overall width
108 in (9 ft 0 in) / 2,743.2 mm
Overall height
132 in (11 ft 0 in) / 3,352.8 mm
Front tread width
78 in (6 ft 6 in) / 1,981.2 mm
Rear tread width
68 in (5 ft 8 in) / 1,727.2 mm
Tractor Size Comparison Chart
Overall length comparison
This model
276 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
108 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
132 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 8225R Extra Dimension Notes
Storage fit note
The John Deere 8225R is not something to squeeze into tight domestic storage. With length 276 in (23 ft 0 in) / 7,010.4 mm, width 108 in (9 ft 0 in) / 2,743.2 mm, and height 132 in (11 ft 0 in) / 3,352.8 mm, use machinery-shed expectations.
Fitment note
The John Deere 8225R physical size reads as length at 276 in (23 ft 0 in) / 7,010.4 mm, width at 108 in (9 ft 0 in) / 2,743.2 mm, and height at 132 in (11 ft 0 in) / 3,352.8 mm. Use those values as the baseline before adding implement length.
Tread width note
The John Deere 8225R tread-width row shows 78 in (6 ft 6 in) / 1,981.2 mm at the front and 68 in (5 ft 8 in) / 1,727.2 mm at the rear. It belongs in the page because wheel stance affects fit and row work.
Storage Tips
Leave room around the John Deere 8225R for mirrors, steps, tires, cab/ROPS and attachments.
A straight approach into the bay matters more as tractor width and wheelbase increase.
For this class, doorway width and attachment clearance are major planning numbers.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
Do not judge it by floor length alone. This tractor is 276 in long, 108 in wide and 132 in tall, so the garage check needs height, width and depth clearance together: about 14 ft high, 14 ft wide, and 32 ft deep.
What size door should I check?
For this very large farm tractor, check the narrowest real opening. A doorway close to 108 in wide or 132 in tall is not enough; aim for roughly 14 ft high, 14 ft wide, 32 ft deep.
Do attachments change the storage size?
Yes. The John Deere 8225R’s 108 in width and 132 in height are the starting point, but a mower deck can increase width and a loader or rear implement can increase length.
How much maneuvering room should I allow?
A straight run into the bay is the cleanest setup. For a 276 in long tractor, about 40 ft outside the door is a better benchmark than squeezing in from a tight turn.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
