The John Deere 8210T is 96.5 in wide and 120.2 in tall, with a 116.9 in wheelbase.
Width96.5 in (8 ft 0.5 in) / 2,451.1 mm
Height120.2 in (10 ft 0.2 in) / 3,053.1 mm
Wheelbase116.9 in (9 ft 8.9 in) / 2,969.3 mm
Ground clearance23.2 in (1 ft 11.2 in) / 589.3 mm
John Deere 8210T Dimensions
Overall width
96.5 in (8 ft 0.5 in) / 2,451.1 mm
Overall height
120.2 in (10 ft 0.2 in) / 3,053.1 mm
Wheelbase
116.9 in (9 ft 8.9 in) / 2,969.3 mm
Ground clearance
23.2 in (1 ft 11.2 in) / 589.3 mm
Tractor Size Comparison Chart
Overall width comparison
This model
96.5 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
120.2 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
116.9 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
23.2 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 8210T Extra Dimension Notes
Fitment note
The John Deere 8210T dimensions show width at 96.5 in (8 ft 0.5 in) / 2,451.1 mm and height at 120.2 in (10 ft 0.2 in) / 3,053.1 mm. Leave extra room for implements, loader frames, tires and steering angle.
Wheelbase note
The John Deere 8210T wheelbase is listed as 116.9 in (9 ft 8.9 in) / 2,969.3 mm. It helps explain how much chassis is under the tractor.
Ground clearance note
The John Deere 8210T lists ground clearance at 23.2 in (1 ft 11.2 in) / 589.3 mm. It is a simple but useful field-use measurement.
Storage Tips
A farm shed or machinery bay is the sensible storage target for the John Deere 8210T.
Use the bare dimensions only as a starting point; a practical storage target is 14 ft high and 14 ft wide.
The John Deere 8210T should be treated as broadacre-sized machinery for storage planning.
Wheelbase is 116.9 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
For taller tractors, a door that looks close is not good enough – measure it.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 120.2 in tall or 96.5 in wide, count it as too tight. The safer check for the John Deere 8210T is around 14 ft high and 14 ft wide.
What size door should I check?
Use 14 ft high and 14 ft wide as the door-and-bay target. That is based on the tractor’s 120.2 in height, 96.5 in width and length not captured length, plus working clearance.
Do attachments change the storage size?
Yes. The more the shed fit depends on the exact length not captured length, the more you should remove attachments or choose a deeper bay.
How much maneuvering room should I allow?
Leave turning room outside and walk-around room inside. The tractor is length not captured long, 96.5 in wide, and has a 116.9 in wheelbase, so a tight turn beside posts or fences is the real problem.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
