The John Deere 7280R is 186 in long, 90 in wide, and 126 in tall.
Length186 in (15 ft 6 in) / 4,724.4 mm
Width90 in (7 ft 6 in) / 2,286 mm
Height126 in (10 ft 6 in) / 3,200.4 mm
John Deere 7280R Dimensions
Overall length
186 in (15 ft 6 in) / 4,724.4 mm
Overall width
90 in (7 ft 6 in) / 2,286 mm
Overall height
126 in (10 ft 6 in) / 3,200.4 mm
Tractor Size Comparison Chart
Overall length comparison
This model
186 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
90 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
126 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 7280R Extra Dimension Notes
Storage fit note
The John Deere 7280R is not something to squeeze into tight domestic storage. With length 186 in (15 ft 6 in) / 4,724.4 mm, width 90 in (7 ft 6 in) / 2,286 mm, and height 126 in (10 ft 6 in) / 3,200.4 mm, use machinery-shed expectations.
Fitment note
The John Deere 7280R physical size reads as length at 186 in (15 ft 6 in) / 4,724.4 mm, width at 90 in (7 ft 6 in) / 2,286 mm, and height at 126 in (10 ft 6 in) / 3,200.4 mm. Use those values as the baseline before adding implement length.
Storage Tips
Leave room around the John Deere 7280R for mirrors, steps, tires, cab/ROPS and attachments.
A straight approach into the bay matters more as tractor width and wheelbase increase.
Utility tractors are usually happier in a farm shed than a residential-style garage.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
Do not judge it by floor length alone. This tractor is 186 in long, 90 in wide and 126 in tall, so the garage check needs height, width and depth clearance together: about 14 ft high, 10 ft wide, and 20 ft deep.
What size door should I check?
Do not size the door to exactly 126 in by 90 in. For this model, use about 14 ft height and 10 ft width, then allow 20 ft depth for the 186 in tractor length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 126 in for overhead clearance, 90 in for side clearance and 186 in for bay depth.
How much maneuvering room should I allow?
Without a captured wheelbase, the practical rule is simple: give the 186 in tractor length enough straight approach before the 10 ft doorway.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
