The John Deere 5220 is 120 in long, 48 in wide, and 84 in tall, with a 90 in wheelbase.
John Deere 5220 Dimensions
| Overall length | 120 in (10 ft 0 in) / 3,048 mm |
|---|---|
| Overall width | 48 in (4 ft 0 in) / 1,219.2 mm |
| Overall height | 84 in (7 ft 0 in) / 2,133.6 mm |
| Wheelbase | 90 in (7 ft 6 in) / 2,286 mm |
| Ground clearance | 24.8 in (2 ft 0.8 in) / 629.9 mm |
Tractor Size Comparison Chart
Overall length comparison
Overall width comparison
Overall height comparison
Wheelbase comparison
Ground clearance comparison
John Deere 5220 Extra Dimension Notes
| Fitment note | The John Deere 5220 has listed dimensions of length at 120 in (10 ft 0 in) / 3,048 mm, width at 48 in (4 ft 0 in) / 1,219.2 mm, and height at 84 in (7 ft 0 in) / 2,133.6 mm. Treat them as the starting point for storage and trailer planning. |
|---|---|
| Wheelbase note | The John Deere 5220 wheelbase is listed at 90 in (7 ft 6 in) / 2,286 mm. Wheelbase helps explain how planted or compact the tractor feels compared with similar models. |
| Ground clearance note | The John Deere 5220 shows 24.8 in (2 ft 0.8 in) / 629.9 mm ground clearance. That is the underside clearance figure in the dimension set. |
Storage Tips
- Floor space is not enough; check the door height, side clearance and attachment length.
- For a compact tractor, storage usually comes down to doorway height and attachment length.
- Use the 90 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 84 in tall or 48 in wide, count it as too tight. The safer check for the John Deere 5220 is around 8 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
Measure the real clear opening, not the advertised door size. You need it to clear the John Deere 5220’s 84 in height and 48 in width, with about 15 ft for the 120 in length.
Do attachments change the storage size?
Yes. Measure the tractor in storage trim: highest point compared with 84 in, widest point compared with 48 in, and longest parked length compared with 120 in.
How much maneuvering room should I allow?
If you cannot approach straight, go wider than 8 ft. With 48 in tractor width and a 90 in wheelbase, angled entries need extra side margin.
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.







