The John Deere 4200 is 117 in long, 53 in wide, and 50.4 in tall, with a 65 in wheelbase.
Length117 in (9 ft 9 in) / 2,971.8 mm
Width53 in (4 ft 5 in) / 1,346.2 mm
Height50.4 in (4 ft 2.4 in) / 1,280.2 mm
Wheelbase65 in (5 ft 5 in) / 1,651 mm
Ground clearance10.5 in / 266.7 mm
John Deere 4200 Dimensions
Overall length
117 in (9 ft 9 in) / 2,971.8 mm
Overall width
53 in (4 ft 5 in) / 1,346.2 mm
Overall height
50.4 in (4 ft 2.4 in) / 1,280.2 mm
Wheelbase
65 in (5 ft 5 in) / 1,651 mm
Ground clearance
10.5 in / 266.7 mm
Tractor Size Comparison Chart
Overall length comparison
This model
117 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
53 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
50.4 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
65 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
10.5 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 4200 Extra Dimension Notes
Fitment note
The John Deere 4200 fitment answer depends on length at 117 in (9 ft 9 in) / 2,971.8 mm, width at 53 in (4 ft 5 in) / 1,346.2 mm, and height at 50.4 in (4 ft 2.4 in) / 1,280.2 mm. These are the numbers to compare with your real storage space.
Wheelbase note
The John Deere 4200 has a 65 in (5 ft 5 in) / 1,651 mm wheelbase, giving it a compact tractor stance in practical terms.
Ground clearance note
The captured John Deere 4200 ground clearance is 10.5 in / 266.7 mm. It helps explain how much obstacle clearance the tractor has.
Storage Tips
Recommended storage clearance: target about 84 in (7 ft) clear height; target about 96 in (8 ft) clear width; target about 180 in (15 ft) bay depth.
Do not assume residential garage fit unless height and bay depth both clear comfortably.
A 65 in wheelbase means the approach into the storage bay matters, not just the doorway width.
Storage FAQ
Will it fit in a garage?
The John Deere 4200 is 117 in long, 53 in wide and 50.4 in tall, so a garage only makes sense if it beats those numbers with real clearance. A practical check is 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
Start with the hard numbers: 50.4 in high, 53 in wide and 117 in long. Then step up to a practical storage target of about 7 ft high, 8 ft wide, and 15 ft deep.
Do attachments change the storage size?
Yes. Treat 117 in as the bare length only. If front or rear gear stays fitted, add roughly 3 ft to 6 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 65 in wheelbase and 53 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
