The John Deere 3300 is 115.8 in long, 53.5 in wide, and 73.4 in tall, with a 77.8 in wheelbase.
John Deere 3300 Dimensions
| Overall length | 115.8 in (9 ft 7.8 in) / 2,941.3 mm |
|---|---|
| Overall width | 53.5 in (4 ft 5.5 in) / 1,358.9 mm |
| Overall height | 73.4 in (6 ft 1.4 in) / 1,864.4 mm |
| Wheelbase | 77.8 in (6 ft 5.8 in) / 1,976.1 mm |
| Ground clearance | 11 in / 279.4 mm |
Tractor Size Comparison Chart
Overall length comparison
Overall width comparison
Overall height comparison
Wheelbase comparison
Ground clearance comparison
John Deere 3300 Extra Dimension Notes
| Fitment note | The John Deere 3300 fitment answer depends on length at 115.8 in (9 ft 7.8 in) / 2,941.3 mm, width at 53.5 in (4 ft 5.5 in) / 1,358.9 mm, and height at 73.4 in (6 ft 1.4 in) / 1,864.4 mm. These are the numbers to compare with your real storage space. |
|---|---|
| Wheelbase note | The John Deere 3300 has a 77.8 in (6 ft 5.8 in) / 1,976.1 mm wheelbase, giving it a compact tractor stance in practical terms. |
| Ground clearance note | The captured John Deere 3300 ground clearance is 11 in / 279.4 mm. It helps explain how much obstacle clearance the tractor has. |
Storage Tips
- Recommended storage clearance: target about 84 in (7 ft) clear height; target about 96 in (8 ft) clear width; target about 180 in (15 ft) bay depth.
- Do not assume residential garage fit unless height and bay depth both clear comfortably.
- A 77.8 in wheelbase means the approach into the storage bay matters, not just the doorway width.
Storage FAQ
Will it fit in a garage?
The John Deere 3300 is 115.8 in long, 53.5 in wide and 73.4 in tall, so a garage only makes sense if it beats those numbers with real clearance. A practical check is 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
Start with the hard numbers: 73.4 in high, 53.5 in wide and 115.8 in long. Then step up to a practical storage target of about 7 ft high, 8 ft wide, and 15 ft deep.
Do attachments change the storage size?
Yes. Treat 115.8 in as the bare length only. If front or rear gear stays fitted, add roughly 3 ft to 6 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 77.8 in wheelbase and 53.5 in width, tight offset entries are where damage happens.
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.







