The John Deere 2840 is 90.3 in wide and 67.1 in tall, with a 84 in wheelbase.
John Deere 2840 Dimensions
| Overall width | 90.3 in (7 ft 6.3 in) / 2,293.6 mm |
|---|---|
| Overall height | 67.1 in (5 ft 7.1 in) / 1,704.3 mm |
| Wheelbase | 84 in (7 ft 0 in) / 2,133.6 mm |
| Ground clearance | 14.5 in (1 ft 2.5 in) / 368.3 mm |
Tractor Size Comparison Chart
Overall width comparison
Overall height comparison
Wheelbase comparison
Ground clearance comparison
John Deere 2840 Extra Dimension Notes
| Storage fit note | The John Deere 2840 is a realistic candidate for garage-style storage in the right setup. With width 90.3 in (7 ft 6.3 in) / 2,293.6 mm and height 67.1 in (5 ft 7.1 in) / 1,704.3 mm, measure the door, not just the room. |
|---|---|
| Wheelbase note | The John Deere 2840’s 84 in (7 ft 0 in) / 2,133.6 mm wheelbase gives useful context to the overall length. It shows how much of the tractor is actual chassis span. |
| Ground clearance note | The John Deere 2840 clearance value is 14.5 in (1 ft 2.5 in) / 368.3 mm. It is not a storage spec, but it matters in working conditions. |
Storage Tips
- Floor space is not enough; check the door height, side clearance and attachment length.
- Recommended storage clearance: target about 108 in (9 ft) clear height; target about 144 in (12 ft) clear width.
- For this class, doorway width and attachment clearance are major planning numbers.
- Use the 84 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears 67.1 in height, 90.3 in width and length not captured length with margin. Around 9 ft high and 12 ft wide is the no-drama check.
What size door should I check?
Start with the hard numbers: 67.1 in high, 90.3 in wide and length not captured long. Then step up to a practical storage target of about 9 ft high and 12 ft wide.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 84 in wheelbase and 90.3 in width, tight offset entries are where damage happens.
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.







