The John Deere 1845F is 122.1 in long, 51.7 in wide, and 78.7 in tall.
Length122.1 in (10 ft 2.1 in) / 3,101.3 mm
Width51.7 in (4 ft 3.7 in) / 1,313.2 mm
Height78.7 in (6 ft 6.7 in) / 1,999 mm
John Deere 1845F Dimensions
Overall length
122.1 in (10 ft 2.1 in) / 3,101.3 mm
Overall width
51.7 in (4 ft 3.7 in) / 1,313.2 mm
Overall height
78.7 in (6 ft 6.7 in) / 1,999 mm
Tractor Size Comparison Chart
Overall length comparison
This model
122.1 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
51.7 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
78.7 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 1845F Extra Dimension Notes
Storage fit note
Storage-wise, the John Deere 1845F is in the smaller end of tractor sizing. With length 122.1 in (10 ft 2.1 in) / 3,101.3 mm, width 51.7 in (4 ft 3.7 in) / 1,313.2 mm, and height 78.7 in (6 ft 6.7 in) / 1,999 mm, standard-style storage may be possible, but attachments can change the answer.
Storage Tips
The John Deere 1845F is one of the easier tractor sizes to store, but a loader, mower deck or canopy can quickly change the fit.
Compact sizing means the John Deere 1845F may suit acreage sheds, carports and small equipment bays if the door is tall enough.
Storage FAQ
Will it fit in a garage?
This tractor’s 122.1 in length and 78.7 in height make ordinary garage storage doubtful unless the opening is oversized. Use 8 ft high, 8 ft wide, 15 ft deep as the practical benchmark.
What size door should I check?
The clean check is 8 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 78.7 in height, 51.7 in width and 122.1 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 78.7 in for overhead clearance, 51.7 in for side clearance and 122.1 in for bay depth.
How much maneuvering room should I allow?
If posts, fences or parked equipment sit near the doorway, go wider than 8 ft. A 51.7 in wide tractor needs side margin when entering at any angle.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
