John Deere 1020 VU Dimensions, Length, Width & Height

Quick answer:

The John Deere 1020 VU is 122 in long, 38.6 in wide, and 49.2 in tall.

Length122 in (10 ft 2 in) / 3,098.8 mm
Width38.6 in (3 ft 2.6 in) / 980.4 mm
Height49.2 in (4 ft 1.2 in) / 1,249.7 mm

John Deere 1020 VU Dimensions

Overall length 122 in (10 ft 2 in) / 3,098.8 mm
Overall width 38.6 in (3 ft 2.6 in) / 980.4 mm
Overall height 49.2 in (4 ft 1.2 in) / 1,249.7 mm
Rear tread width 11.2 in / 284.5 mm

Tractor Size Comparison Chart

Overall length comparison

This model

122 in

Average

125.2 in

Low

44.5 in

High

346.3 in

Overall width comparison

This model

38.6 in

Average

70 in

Low

20 in

High

176 in

Overall height comparison

This model

49.2 in

Average

79.8 in

Low

36 in

High

156 in

John Deere 1020 VU Extra Dimension Notes

Fitment note The John Deere 1020 VU fitment answer depends on length at 122 in (10 ft 2 in) / 3,098.8 mm, width at 38.6 in (3 ft 2.6 in) / 980.4 mm, and height at 49.2 in (4 ft 1.2 in) / 1,249.7 mm. These are the numbers to compare with your real storage space.
Tread width note Rear tread for the John Deere 1020 VU is listed as 11.2 in / 284.5 mm. The front figure was not captured clearly.

Storage Tips

  • Recommended storage clearance: target about 84 in (7 ft) clear height; target about 96 in (8 ft) clear width; target about 180 in (15 ft) bay depth.
  • Do not assume residential garage fit unless height and bay depth both clear comfortably.

Storage FAQ

Will it fit in a garage?

The tractor itself is 122 in long, 38.6 in wide, and 49.2 in tall. For storage, that means the opening should be closer to 7 ft high and 8 ft wide, with about 15 ft of usable depth.

What size door should I check?

The door should be bigger than the tractor by about 10 in of height margin and 16 in of side margin. That puts the target around 7 ft high, 8 ft wide, and 15 ft deep.

Do attachments change the storage size?

Yes. A loader mainly adds depth and sometimes height; a rear implement adds depth; a mower deck or tire setting can add width beyond the listed 38.6 in.

How much maneuvering room should I allow?

Use the 122 in length as the maneuvering clue here. A bay around 15 ft deep still needs approach room outside the shed, especially if implements stay fitted.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.