The John Deere 710 is 320 in long, 90.5 in wide, and 111 in tall, with a 94.5 in wheelbase.
Length320 in (26 ft 8 in) / 8,128 mm
Width90.5 in (7 ft 6.5 in) / 2,298.7 mm
Height111 in (9 ft 3 in) / 2,819.4 mm
Wheelbase94.5 in (7 ft 10.5 in) / 2,400.3 mm
John Deere 710 Dimensions
Overall length
320 in (26 ft 8 in) / 8,128 mm
Overall width
90.5 in (7 ft 6.5 in) / 2,298.7 mm
Overall height
111 in (9 ft 3 in) / 2,819.4 mm
Wheelbase
94.5 in (7 ft 10.5 in) / 2,400.3 mm
Rear tread width
16.9 in (1 ft 4.9 in) / 429.3 mm
Tractor Size Comparison Chart
Overall length comparison
This model
320 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
90.5 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
111 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
94.5 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 710 Extra Dimension Notes
Storage fit note
Storage-wise, the John Deere 710 is large-machine territory. With length 320 in (26 ft 8 in) / 8,128 mm, width 90.5 in (7 ft 6.5 in) / 2,298.7 mm, and height 111 in (9 ft 3 in) / 2,819.4 mm, allow room for attachments, tracks, duals or implements.
Fitment note
The John Deere 710 fitment specs show length at 320 in (26 ft 8 in) / 8,128 mm, width at 90.5 in (7 ft 6.5 in) / 2,298.7 mm, and height at 111 in (9 ft 3 in) / 2,819.4 mm. That is the practical buyer information for size.
Wheelbase note
For the John Deere 710, the captured wheelbase is 94.5 in (7 ft 10.5 in) / 2,400.3 mm. A longer wheelbase generally favors stability, while a shorter one usually feels more compact.
Tread width note
The John Deere 710 rear wheel tread is 16.9 in (1 ft 4.9 in) / 429.3 mm. Treat the front tread as unconfirmed here.
Storage Tips
For the John Deere 710, start with a clear opening around 14 ft high, 12 ft wide, and 36 ft deep, then add room for duals, tracks, weights or implements.
The John Deere 710 should be treated as broadacre-sized machinery for storage planning.
Wheelbase is 94.5 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
For taller tractors, a door that looks close is not good enough – measure it.
Storage FAQ
Will it fit in a garage?
A tight garage is a bad match when the machine is 320 in long, 90.5 in wide, 111 in tall, and 94.5 in wheelbase. The John Deere 710 needs a clear opening and bay closer to 14 ft high, 12 ft wide, and 36 ft deep for comfortable storage.
What size door should I check?
A bare fit only says the tractor can squeeze through. For normal use, the John Deere 710’s 111 in height and 90.5 in width point to about 14 ft high and 12 ft wide, with 36 ft depth.
Do attachments change the storage size?
Yes. If the bay only clears the listed 320 in length, it is too short once attachments stay on. Use about 36 ft bare, then add attachment length.
How much maneuvering room should I allow?
The 320 in length needs bay depth, but the 94.5 in wheelbase needs lineup room. Treat about 40 ft outside the shed as the practical approach zone.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
