The John Deere 332 is 43.3 in wide and 44.5 in tall, with a 49.7 in wheelbase.
Width43.3 in (3 ft 7.3 in) / 1,099.8 mm
Height44.5 in (3 ft 8.5 in) / 1,130.3 mm
Wheelbase49.7 in (4 ft 1.7 in) / 1,262.4 mm
John Deere 332 Dimensions
Overall width
43.3 in (3 ft 7.3 in) / 1,099.8 mm
Overall height
44.5 in (3 ft 8.5 in) / 1,130.3 mm
Wheelbase
49.7 in (4 ft 1.7 in) / 1,262.4 mm
Tractor Size Comparison Chart
Overall width comparison
This model
43.3 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
44.5 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
49.7 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 332 Extra Dimension Notes
Storage fit note
For shed fit, the John Deere 332 is not oversized. With width 43.3 in (3 ft 7.3 in) / 1,099.8 mm and height 44.5 in (3 ft 8.5 in) / 1,130.3 mm, a good garage, carport or compact shed may be workable.
Fitment note
The John Deere 332 fitment specs show width at 43.3 in (3 ft 7.3 in) / 1,099.8 mm and height at 44.5 in (3 ft 8.5 in) / 1,130.3 mm. That is the practical buyer information for size.
Wheelbase note
For the John Deere 332, the captured wheelbase is 49.7 in (4 ft 1.7 in) / 1,262.4 mm. A longer wheelbase generally favors stability, while a shorter one usually feels more compact.
Storage Tips
For the John Deere 332, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
The John Deere 332 should be treated as broadacre-sized machinery for storage planning.
Wheelbase is 49.7 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
Storage FAQ
Will it fit in a garage?
A tight garage is a bad match when the machine is 43.3 in wide, 44.5 in tall, and 49.7 in wheelbase. The John Deere 332 needs a clear opening and bay closer to 7 ft high and 8 ft wide for comfortable storage.
What size door should I check?
A bare fit only says the tractor can squeeze through. For normal use, the John Deere 332’s 44.5 in height and 43.3 in width point to about 7 ft high and 8 ft wide, with the tractor length plus attachment room depth.
Do attachments change the storage size?
Yes. If the bay only clears the listed length not captured length, it is too short once attachments stay on. Use about the tractor length plus attachment room bare, then add attachment length.
How much maneuvering room should I allow?
The length not captured length needs bay depth, but the 49.7 in wheelbase needs lineup room. Treat about 10 ft outside the shed as the practical approach zone.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
