The John Deere 301A is 121 in long and 75 in wide, with a 58 in wheelbase.
Length121 in (10 ft 1 in) / 3,073.4 mm
Width75 in (6 ft 3 in) / 1,905 mm
Wheelbase58 in (4 ft 10 in) / 1,473.2 mm
Ground clearance12.5 in (1 ft 0.5 in) / 317.5 mm
John Deere 301A Dimensions
Overall length
121 in (10 ft 1 in) / 3,073.4 mm
Overall width
75 in (6 ft 3 in) / 1,905 mm
Wheelbase
58 in (4 ft 10 in) / 1,473.2 mm
Ground clearance
12.5 in (1 ft 0.5 in) / 317.5 mm
Rear tread width
70 in (5 ft 10 in) / 1,778 mm
Tractor Size Comparison Chart
Overall length comparison
This model
121 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
75 in
Average
70 in
Low
20 in
High
176 in
Wheelbase comparison
This model
58 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
12.5 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 301A Extra Dimension Notes
Storage fit note
The John Deere 301A can be treated as a tighter-storage tractor. With length 121 in (10 ft 1 in) / 3,073.4 mm and width 75 in (6 ft 3 in) / 1,905 mm, check ROPS/cab height and loader length.
Fitment note
The John Deere 301A footprint is shown by length at 121 in (10 ft 1 in) / 3,073.4 mm and width at 75 in (6 ft 3 in) / 1,905 mm. These are the numbers that matter in real storage planning.
Wheelbase note
For the John Deere 301A, 58 in (4 ft 10 in) / 1,473.2 mm is the listed wheelbase. That helps separate compact-feeling machines from longer farm tractors.
Ground clearance note
The John Deere 301A has 12.5 in (1 ft 0.5 in) / 317.5 mm of ground clearance listed. That matters for crop, terrain and underside clearance.
Tread width note
The John Deere 301A rear tread figure is 70 in (5 ft 10 in) / 1,778 mm. This is useful, but not the full wheel-stance picture.
Storage Tips
Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
Do not assume residential garage fit unless height and bay depth both clear comfortably.
A 58 in wheelbase means the approach into the storage bay matters, not just the doorway width.
Storage FAQ
Will it fit in a garage?
With height not captured height and 75 in width, the doorway is the first limit; with 121 in length, bay depth is the second. Start with 8 ft wide and 15 ft deep, not the bare dimensions.
What size door should I check?
If there are posts, tracks or stored gear near the doorway, go bigger than the tractor height plus clearance by 8 ft. The tractor’s base size is 121 in long and 75 in wide before attachments.
Do attachments change the storage size?
Yes. The John Deere 301A’s 75 in width and height not captured height are the starting point, but a mower deck can increase width and a loader or rear implement can increase length.
How much maneuvering room should I allow?
A door sized around 8 ft is only useful if the tractor can enter square. The John Deere 301A’s 58 in wheelbase means the approach path matters as much as the opening.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
