The John Deere 108 is 61.9 in long, 39.4 in wide, and 39.4 in tall.
Length61.9 in (5 ft 1.9 in) / 1,572.3 mm
Width39.4 in (3 ft 3.4 in) / 1,000.8 mm
Height39.4 in (3 ft 3.4 in) / 1,000.8 mm
John Deere 108 Dimensions
Overall length
61.9 in (5 ft 1.9 in) / 1,572.3 mm
Overall width
39.4 in (3 ft 3.4 in) / 1,000.8 mm
Overall height
39.4 in (3 ft 3.4 in) / 1,000.8 mm
Tractor Size Comparison Chart
Overall length comparison
This model
61.9 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
39.4 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
39.4 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 108 Extra Dimension Notes
Size class note
The John Deere 108 is firmly a small compact tractor based on its listed measurements. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The John Deere 108 can be treated as a tighter-storage tractor. With length 61.9 in (5 ft 1.9 in) / 1,572.3 mm, width 39.4 in (3 ft 3.4 in) / 1,000.8 mm, and height 39.4 in (3 ft 3.4 in) / 1,000.8 mm, check ROPS/cab height and loader length.
Fitment note
The John Deere 108 dimension figures are length at 61.9 in (5 ft 1.9 in) / 1,572.3 mm, width at 39.4 in (3 ft 3.4 in) / 1,000.8 mm, and height at 39.4 in (3 ft 3.4 in) / 1,000.8 mm. Match these against shed height, gate width and trailer length.
Storage Tips
Compact size helps, but a loader or mower can still make the parked footprint much bigger.
Storage FAQ
Will it fit in a garage?
For the John Deere 108, the listed storage problem is simple: 39.4 in height, 39.4 in width and 61.9 in length all have to clear. The sensible garage/shed target is 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
Use the John Deere 108’s dimensions directly: 39.4 in tall needs more than a 39.4 in opening, 39.4 in wide needs side clearance, and 61.9 in long needs about 15 ft bay depth.
Do attachments change the storage size?
Yes. If the storage target is 7 ft high, 8 ft wide, and 15 ft deep, attachments should be checked against that, not against the bare 61.9 in length alone.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 61.9 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
