The John Deere 7R 350 is 180 in long, 84 in wide, and 120 in tall, with a 115.2 in wheelbase.
Length180 in (15 ft 0 in) / 4,572 mm
Width84 in (7 ft 0 in) / 2,133.6 mm
Height120 in (10 ft 0 in) / 3,048 mm
Wheelbase115.2 in (9 ft 7.2 in) / 2,926.1 mm
John Deere 7R 350 Dimensions
Overall length
180 in (15 ft 0 in) / 4,572 mm
Overall width
84 in (7 ft 0 in) / 2,133.6 mm
Overall height
120 in (10 ft 0 in) / 3,048 mm
Wheelbase
115.2 in (9 ft 7.2 in) / 2,926.1 mm
Tractor Size Comparison Chart
Overall length comparison
This model
180 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
84 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
120 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
115.2 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 7R 350 Extra Dimension Notes
Size class note
The John Deere 7R 350 dimension profile makes it a utility tractor. It is better suited to farm work, loader jobs, hay, livestock properties and machinery-shed storage than tight residential spaces.
Storage fit note
The John Deere 7R 350 is not something to squeeze into tight domestic storage. With length 180 in (15 ft 0 in) / 4,572 mm, width 84 in (7 ft 0 in) / 2,133.6 mm, and height 120 in (10 ft 0 in) / 3,048 mm, use machinery-shed expectations.
Fitment note
The John Deere 7R 350 gives length at 180 in (15 ft 0 in) / 4,572 mm, width at 84 in (7 ft 0 in) / 2,133.6 mm, and height at 120 in (10 ft 0 in) / 3,048 mm. Use those numbers for the shed, trailer and access check.
Wheelbase note
For size comparison, the John Deere 7R 350’s 115.2 in (9 ft 7.2 in) / 2,926.1 mm wheelbase is a strong reference point.
Storage Tips
Leave room around the John Deere 7R 350 for mirrors, steps, tires, cab/ROPS and attachments.
Utility tractors are usually happier in a farm shed than a residential-style garage.
Use the 115.2 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
If the tractor is stored bare, compare your garage to 180 in long, 84 in wide and 120 in tall. If you want normal parking room, use around 12 ft high, 10 ft wide, and 20 ft deep instead.
What size door should I check?
The clean check is 12 ft high, 10 ft wide and 20 ft deep. That gives margin over the listed 120 in height, 84 in width and 180 in length.
Do attachments change the storage size?
Yes. Treat 180 in as the bare length only. If front or rear gear stays fitted, add roughly 4 ft to 8 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 115.2 in wheelbase and 84 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
