The John Deere X304 may be garage-friendly in some setups, but only after checking the actual door height and width. With width 53 in (4 ft 5 in) / 1,346.2 mm, measure before assuming fit.
Fitment note
The John Deere X304 footprint is defined by width at 53 in (4 ft 5 in) / 1,346.2 mm. For storage, the tight point is usually the door opening.
Tread width note
The John Deere X304 gives front/rear tread specs of 41 in (3 ft 5 in) / 1,041.4 mm at the front and 41 in (3 ft 5 in) / 1,041.4 mm at the rear. Use them when stance matters.
Storage Tips
Garage-style storage may work, but judge it against 10 ft wide, not the exact tractor dimensions.
Use the bare dimensions only as a starting point; a practical storage target is 10 ft wide.
Expect large shed requirements, especially with duals, tracks or implements fitted.
Storage FAQ
Will it fit in a garage?
At 53 in wide, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 10 ft wide before counting attachments.
What size door should I check?
For this storage class, the safer number is 10 ft wide. That keeps the doorway and bay ahead of the tractor’s actual height not captured height, 53 in width and length not captured length.
Do attachments change the storage size?
Yes. The published length not captured length is useful for the bare tractor, but the real storage number is the longest point from front attachment to rear attachment.
How much maneuvering room should I allow?
For this very large farm tractor, the doorway is only half the storage check. With length not captured overall length, plan room outside the shed to straighten the tractor before entering.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
