The John Deere D170 is 60 in wide, with a 48 in wheelbase.
Width60 in (5 ft 0 in) / 1,524 mm
Wheelbase48 in (4 ft 0 in) / 1,219.2 mm
Ground clearance4.5 in / 114.3 mm
John Deere D170 Dimensions
Overall width
60 in (5 ft 0 in) / 1,524 mm
Wheelbase
48 in (4 ft 0 in) / 1,219.2 mm
Ground clearance
4.5 in / 114.3 mm
Front tread width
60 in (5 ft 0 in) / 1,524 mm
Rear tread width
60 in (5 ft 0 in) / 1,524 mm
Tractor Size Comparison Chart
Overall width comparison
This model
60 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
48 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
4.5 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere D170 Extra Dimension Notes
Storage fit note
Storage-wise, the John Deere D170 is in the smaller end of tractor sizing. With width 60 in (5 ft 0 in) / 1,524 mm, standard-style storage may be possible, but attachments can change the answer.
Fitment note
The John Deere D170 physical footprint is width at 60 in (5 ft 0 in) / 1,524 mm. That is what matters when lining up storage or transport.
Wheelbase note
The John Deere D170 wheelbase spec is 48 in (4 ft 0 in) / 1,219.2 mm. Compare it with the overall length to understand front and rear overhang.
Ground clearance note
Ground clearance for the John Deere D170 is 4.5 in / 114.3 mm. That is the number to check if the tractor will work around rows, rough paddocks or raised ground.
Tread width note
The John Deere D170 tread dimensions are 60 in (5 ft 0 in) / 1,524 mm at the front and 60 in (5 ft 0 in) / 1,524 mm at the rear. This is the wheel-position part of the size story.
Storage Tips
The John Deere D170 is one of the easier tractor sizes to store, but a loader, mower deck or canopy can quickly change the fit.
Measure the lowest overhead point, not the tallest part of the shed roof.
Longer wheelbase machines are easier to store when the door approach is straight and uncluttered.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears height not captured height, 60 in width and length not captured length with margin. Around 10 ft wide is the no-drama check.
What size door should I check?
Start with the hard numbers: height not captured high, 60 in wide and length not captured long. Then step up to a practical storage target of about 10 ft wide.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 48 in wheelbase and 60 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
