The John Deere 8310R is 243.9 in long and 96 in wide, with a 120 in wheelbase.
Length243.9 in (20 ft 3.9 in) / 6,195.1 mm
Width96 in (8 ft 0 in) / 2,438.4 mm
Wheelbase120 in (10 ft 0 in) / 3,048 mm
Ground clearance20.1 in (1 ft 8.1 in) / 510.5 mm
John Deere 8310R Dimensions
Overall length
243.9 in (20 ft 3.9 in) / 6,195.1 mm
Overall width
96 in (8 ft 0 in) / 2,438.4 mm
Wheelbase
120 in (10 ft 0 in) / 3,048 mm
Ground clearance
20.1 in (1 ft 8.1 in) / 510.5 mm
Tractor Size Comparison Chart
Overall length comparison
This model
243.9 in
Average
138.9 in
Low
63 in
High
346.3 in
Overall width comparison
This model
96 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
120 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
20.1 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 8310R Extra Dimension Notes
Size class note
The John Deere 8310R should be compared against other large farm tractor models rather than smaller machines. It is a large farm tractor, so shed height, gate width, trailer space and implement room matter more than they would on a compact machine.
Storage fit note
The John Deere 8310R storage fit is possible in the right shed. With length 243.9 in (20 ft 3.9 in) / 6,195.1 mm and width 96 in (8 ft 0 in) / 2,438.4 mm, leave space for attachments and turning room.
Fitment note
The John Deere 8310R is listed with length at 243.9 in (20 ft 3.9 in) / 6,195.1 mm and width at 96 in (8 ft 0 in) / 2,438.4 mm. Check the tallest and widest points if cab, ROPS, mirrors or attachments are fitted.
Wheelbase note
The John Deere 8310R has a captured wheelbase of 120 in (10 ft 0 in) / 3,048 mm. Compare this before assuming two tractors are physically similar.
Ground clearance note
The John Deere 8310R ground clearance value is 20.1 in (1 ft 8.1 in) / 510.5 mm. Check it if the machine will be crossing ridges, drains or uneven tracks.
Storage Tips
Do not use exact dimensions as the storage target; allow clearance for ROPS/cab setup, mirrors and attachments.
Recommended storage clearance: target about 144 in (12 ft) clear width; target about 360 in (30 ft) bay depth.
Use the 120 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
At 243.9 in long, 96 in wide, and 120 in wheelbase, a tall garage or small shed is the realistic starting point. Use about 12 ft wide and 30 ft deep before counting attachments.
What size door should I check?
Use 12 ft wide and 30 ft deep as the door-and-bay target. That is based on the tractor’s height not captured height, 96 in width and 243.9 in length, plus working clearance.
Do attachments change the storage size?
Yes. Treat 243.9 in as the bare length only. If front or rear gear stays fitted, add roughly 6 ft to 12 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 120 in wheelbase and 96 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
