The John Deere 7715 is 80 in wide, with a 104.3 in wheelbase.
Width80 in (6 ft 8 in) / 2,032 mm
Wheelbase104.3 in (8 ft 8.3 in) / 2,649.2 mm
Ground clearance16.5 in (1 ft 4.5 in) / 419.1 mm
John Deere 7715 Dimensions
Overall width
80 in (6 ft 8 in) / 2,032 mm
Wheelbase
104.3 in (8 ft 8.3 in) / 2,649.2 mm
Ground clearance
16.5 in (1 ft 4.5 in) / 419.1 mm
Rear tread width
80 in (6 ft 8 in) / 2,032 mm
Tractor Size Comparison Chart
Overall width comparison
This model
80 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
104.3 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
16.5 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 7715 Extra Dimension Notes
Storage fit note
For shed fit, the John Deere 7715 is not oversized. With width 80 in (6 ft 8 in) / 2,032 mm, a good garage, carport or compact shed may be workable.
Wheelbase note
The John Deere 7715 wheelbase sits at 104.3 in (8 ft 8.3 in) / 2,649.2 mm. It is worth checking beside width and height, not in isolation.
Ground clearance note
The John Deere 7715’s ground clearance is shown as 16.5 in (1 ft 4.5 in) / 419.1 mm. It is one of the main working-dimension values.
Tread width note
The John Deere 7715 rear wheel tread is 80 in (6 ft 8 in) / 2,032 mm. Treat the front tread as unconfirmed here.
Storage Tips
For the John Deere 7715, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
Measure the lowest overhead point, not the tallest part of the shed roof.
The John Deere 7715 should be treated as broadacre-sized machinery for storage planning.
Wheelbase is 104.3 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
Storage FAQ
Will it fit in a garage?
The John Deere 7715 is length not captured long, 80 in wide and height not captured tall, so a garage only makes sense if it beats those numbers with real clearance. A practical check is 12 ft wide.
What size door should I check?
Use the John Deere 7715’s dimensions directly: height not captured tall needs more than a height not captured opening, 80 in wide needs side clearance, and length not captured long needs about the tractor length plus attachment room bay depth.
Do attachments change the storage size?
Yes. If the storage target is 12 ft wide, attachments should be checked against that, not against the bare length not captured length alone.
How much maneuvering room should I allow?
Because the tractor is length not captured long with a 104.3 in wheelbase, avoid turning sharply right at the doorway. A straight approach around 20 ft is safer.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
