The John Deere 5070M is 88.6 in long and 62.5 in wide, with a 98.4 in wheelbase.
Length88.6 in (7 ft 4.6 in) / 2,250.4 mm
Width62.5 in (5 ft 2.5 in) / 1,587.5 mm
Wheelbase98.4 in (8 ft 2.4 in) / 2,499.4 mm
Ground clearance18.1 in (1 ft 6.1 in) / 459.7 mm
John Deere 5070M Dimensions
Overall length
88.6 in (7 ft 4.6 in) / 2,250.4 mm
Overall width
62.5 in (5 ft 2.5 in) / 1,587.5 mm
Wheelbase
98.4 in (8 ft 2.4 in) / 2,499.4 mm
Ground clearance
18.1 in (1 ft 6.1 in) / 459.7 mm
Front tread width
62.5 in (5 ft 2.5 in) / 1,587.5 mm
Rear tread width
60 in (5 ft 0 in) / 1,524 mm
Tractor Size Comparison Chart
Overall length comparison
This model
88.6 in
Average
138.9 in
Low
63 in
High
346.3 in
Overall width comparison
This model
62.5 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
98.4 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
18.1 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 5070M Extra Dimension Notes
Fitment note
The John Deere 5070M is best judged by length at 88.6 in (7 ft 4.6 in) / 2,250.4 mm and width at 62.5 in (5 ft 2.5 in) / 1,587.5 mm. The biggest issue is usually width or height, not just floor length.
Wheelbase note
The John Deere 5070M gives a wheelbase figure of 98.4 in (8 ft 2.4 in) / 2,499.4 mm. That helps describe the tractor’s stance.
Ground clearance note
The John Deere 5070M ground clearance spec is 18.1 in (1 ft 6.1 in) / 459.7 mm. It helps decide how forgiving the tractor is on uneven ground.
Tread width note
The John Deere 5070M tread-width capture shows 62.5 in (5 ft 2.5 in) / 1,587.5 mm at the front and 60 in (5 ft 0 in) / 1,524 mm at the rear. This supports row-spacing and stability comparisons.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
For a compact tractor, storage usually comes down to doorway height and attachment length.
Use the 98.4 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
At 88.6 in long, 62.5 in wide, and 98.4 in wheelbase, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 8 ft wide and 15 ft deep before counting attachments.
What size door should I check?
For this compact tractor, check the narrowest real opening. A doorway close to 62.5 in wide or height not captured tall is not enough; aim for roughly 8 ft wide, 15 ft deep.
Do attachments change the storage size?
Yes. The bare tractor is 88.6 in long, 62.5 in wide and height not captured tall; a loader, mower deck, ballast box or rear implement can push the parked size past those numbers.
How much maneuvering room should I allow?
If attachments stay fitted, maneuvering room must be based on the attached length, not just the 88.6 in bare tractor length and 98.4 in wheelbase.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
