The John Deere 5041C is 115.2 in long and 68.5 in wide, with a 73.6 in wheelbase.
Length115.2 in (9 ft 7.2 in) / 2,926.1 mm
Width68.5 in (5 ft 8.5 in) / 1,739.9 mm
Wheelbase73.6 in (6 ft 1.6 in) / 1,869.4 mm
Ground clearance14.8 in (1 ft 2.8 in) / 375.9 mm
John Deere 5041C Dimensions
Overall length
115.2 in (9 ft 7.2 in) / 2,926.1 mm
Overall width
68.5 in (5 ft 8.5 in) / 1,739.9 mm
Wheelbase
73.6 in (6 ft 1.6 in) / 1,869.4 mm
Ground clearance
14.8 in (1 ft 2.8 in) / 375.9 mm
Tractor Size Comparison Chart
Overall length comparison
This model
115.2 in
Average
138.9 in
Low
63 in
High
346.3 in
Overall width comparison
This model
68.5 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
73.6 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
14.8 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 5041C Extra Dimension Notes
Storage fit note
The John Deere 5041C may be garage-friendly in some setups, but only after checking the actual door height and width. With length 115.2 in (9 ft 7.2 in) / 2,926.1 mm and width 68.5 in (5 ft 8.5 in) / 1,739.9 mm, measure before assuming fit.
Fitment note
For the John Deere 5041C, the fitment call starts with length at 115.2 in (9 ft 7.2 in) / 2,926.1 mm and width at 68.5 in (5 ft 8.5 in) / 1,739.9 mm. Everything else is secondary.
Wheelbase note
The John Deere 5041C uses a 73.6 in (6 ft 1.6 in) / 1,869.4 mm wheelbase. This is a practical number for trailer and shed planning.
Ground clearance note
The John Deere 5041C ground clearance is listed at 14.8 in (1 ft 2.8 in) / 375.9 mm. Ground clearance matters for rows, uneven ground, ruts, stubble and underbody clearance.
Storage Tips
Garage-style storage may work, but judge it against 8 ft wide and 15 ft deep, not the exact tractor dimensions.
Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
This size is still realistic for smaller sheds when the approach is straight and the attachments are removed.
The 73.6 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
Will it fit in a garage?
With height not captured height and 68.5 in width, the doorway is the first limit; with 115.2 in length, bay depth is the second. Start with 8 ft wide and 15 ft deep, not the bare dimensions.
What size door should I check?
If there are posts, tracks or stored gear near the doorway, go bigger than the tractor height plus clearance by 8 ft. The tractor’s base size is 115.2 in long and 68.5 in wide before attachments.
Do attachments change the storage size?
Yes. The John Deere 5041C’s 68.5 in width and height not captured height are the starting point, but a mower deck can increase width and a loader or rear implement can increase length.
How much maneuvering room should I allow?
A door sized around 8 ft is only useful if the tractor can enter square. The John Deere 5041C’s 73.6 in wheelbase means the approach path matters as much as the opening.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
