The John Deere 2320 is 109.2 in long and 46.8 in wide, with a 63 in wheelbase.
Length109.2 in (9 ft 1.2 in) / 2,773.7 mm
Width46.8 in (3 ft 10.8 in) / 1,188.7 mm
Wheelbase63 in (5 ft 3 in) / 1,600.2 mm
Ground clearance12.5 in (1 ft 0.5 in) / 317.5 mm
John Deere 2320 Dimensions
Overall length
109.2 in (9 ft 1.2 in) / 2,773.7 mm
Overall width
46.8 in (3 ft 10.8 in) / 1,188.7 mm
Wheelbase
63 in (5 ft 3 in) / 1,600.2 mm
Ground clearance
12.5 in (1 ft 0.5 in) / 317.5 mm
Rear tread width
31.2 in (2 ft 7.2 in) / 792.5 mm
Tractor Size Comparison Chart
Overall length comparison
This model
109.2 in
Average
138.9 in
Low
63 in
High
346.3 in
Overall width comparison
This model
46.8 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
63 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
12.5 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 2320 Extra Dimension Notes
Size class note
The John Deere 2320 dimension set places it in small compact tractor sizing. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The John Deere 2320 may be garage-friendly in some setups, but only after checking the actual door height and width. With length 109.2 in (9 ft 1.2 in) / 2,773.7 mm and width 46.8 in (3 ft 10.8 in) / 1,188.7 mm, measure before assuming fit.
Fitment note
The John Deere 2320 dimensions are useful because they show length at 109.2 in (9 ft 1.2 in) / 2,773.7 mm and width at 46.8 in (3 ft 10.8 in) / 1,188.7 mm. That tells you more than the model series alone.
Wheelbase note
The wheelbase spec for the John Deere 2320 is 63 in (5 ft 3 in) / 1,600.2 mm. It helps round out the dimension picture.
Ground clearance note
The John Deere 2320 ground clearance is 12.5 in (1 ft 0.5 in) / 317.5 mm. This matters if the machine will work in paddocks rather than only yards.
Tread width note
The John Deere 2320 rear tread-width data shows 31.2 in (2 ft 7.2 in) / 792.5 mm. That still helps with stance and row-spacing checks.
Storage Tips
Garage-style storage may work, but judge it against 8 ft wide and 15 ft deep, not the exact tractor dimensions.
Use the bare dimensions only as a starting point; a practical storage target is 8 ft wide and 15 ft deep.
Small tractor storage is usually about door height first, then attachment depth.
The 63 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
Will it fit in a garage?
With height not captured height and 46.8 in width, the doorway is the first limit; with 109.2 in length, bay depth is the second. Start with 8 ft wide and 15 ft deep, not the bare dimensions.
What size door should I check?
Do not size the door to exactly height not captured by 46.8 in. For this model, use about the tractor height plus clearance height and 8 ft width, then allow 15 ft depth for the 109.2 in tractor length.
Do attachments change the storage size?
Yes. A tight bay should be planned around the attached setup. For this small compact tractor, allow about 2 ft to 4 ft extra depth if gear stays on.
How much maneuvering room should I allow?
If the door is close to the 8 ft target, approach angle matters more. The John Deere 2320’s 46.8 in width and 63 in wheelbase need a clean line into the bay.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
