The John Deere 1025R is 48 in wide, with a 57.1 in wheelbase.
Width48 in (4 ft 0 in) / 1,219.2 mm
Wheelbase57.1 in (4 ft 9.1 in) / 1,450.3 mm
Ground clearance7.7 in / 195.6 mm
John Deere 1025R Dimensions
Overall width
48 in (4 ft 0 in) / 1,219.2 mm
Wheelbase
57.1 in (4 ft 9.1 in) / 1,450.3 mm
Ground clearance
7.7 in / 195.6 mm
Front tread width
48 in (4 ft 0 in) / 1,219.2 mm
Rear tread width
48 in (4 ft 0 in) / 1,219.2 mm
Tractor Size Comparison Chart
Overall width comparison
This model
48 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
57.1 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
7.7 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 1025R Extra Dimension Notes
Storage fit note
For shed fit, the John Deere 1025R is not oversized. With width 48 in (4 ft 0 in) / 1,219.2 mm, a good garage, carport or compact shed may be workable.
Fitment note
The John Deere 1025R size numbers are width at 48 in (4 ft 0 in) / 1,219.2 mm. Use those before assuming it will fit into an existing bay or shed.
Wheelbase note
The John Deere 1025R wheelbase spec is 57.1 in (4 ft 9.1 in) / 1,450.3 mm, which gives better size context than length alone.
Ground clearance note
The John Deere 1025R gives 7.7 in / 195.6 mm ground clearance. Use it when judging ruts, crop clearance and rough access.
Tread width note
The John Deere 1025R wheel-tread numbers are 48 in (4 ft 0 in) / 1,219.2 mm at the front and 48 in (4 ft 0 in) / 1,219.2 mm at the rear. They add detail to the basic width spec.
Storage Tips
For the John Deere 1025R, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
The John Deere 1025R should be treated as broadacre-sized machinery for storage planning.
Wheelbase is 57.1 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
Storage FAQ
Will it fit in a garage?
The John Deere 1025R is length not captured long, 48 in wide and height not captured tall, so a garage only makes sense if it beats those numbers with real clearance. A practical check is 8 ft wide.
What size door should I check?
Use the John Deere 1025R’s dimensions directly: height not captured tall needs more than a height not captured opening, 48 in wide needs side clearance, and length not captured long needs about the tractor length plus attachment room bay depth.
Do attachments change the storage size?
Yes. If the storage target is 8 ft wide, attachments should be checked against that, not against the bare length not captured length alone.
How much maneuvering room should I allow?
Because the tractor is length not captured long with a 57.1 in wheelbase, avoid turning sharply right at the doorway. A straight approach around 11 ft is safer.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
