The John Deere 320 is 53.5 in wide, with a 47.9 in wheelbase.
Width53.5 in (4 ft 5.5 in) / 1,358.9 mm
Wheelbase47.9 in (3 ft 11.9 in) / 1,216.7 mm
Ground clearance21 in (1 ft 9 in) / 533.4 mm
John Deere 320 Dimensions
Overall width
53.5 in (4 ft 5.5 in) / 1,358.9 mm
Wheelbase
47.9 in (3 ft 11.9 in) / 1,216.7 mm
Ground clearance
21 in (1 ft 9 in) / 533.4 mm
Tractor Size Comparison Chart
Overall width comparison
This model
53.5 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
47.9 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
21 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 320 Extra Dimension Notes
Storage fit note
The John Deere 320 may be garage-friendly in some setups, but only after checking the actual door height and width. With width 53.5 in (4 ft 5.5 in) / 1,358.9 mm, measure before assuming fit.
Fitment note
The John Deere 320 dimensions are useful because they show width at 53.5 in (4 ft 5.5 in) / 1,358.9 mm. That tells you more than the model series alone.
Wheelbase note
The wheelbase spec for the John Deere 320 is 47.9 in (3 ft 11.9 in) / 1,216.7 mm. It helps round out the dimension picture.
Ground clearance note
The John Deere 320 ground clearance is 21 in (1 ft 9 in) / 533.4 mm. This matters if the machine will work in paddocks rather than only yards.
Storage Tips
Garage-style storage may work, but judge it against 10 ft wide, not the exact tractor dimensions.
Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
Expect large shed requirements, especially with duals, tracks or implements fitted.
The 47.9 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
Will it fit in a garage?
Do not judge it by floor length alone. This tractor is length not captured long, 53.5 in wide and height not captured tall, so the garage check needs height, width and depth clearance together: about 10 ft wide.
What size door should I check?
For this very large farm tractor, check the narrowest real opening. A doorway close to 53.5 in wide or height not captured tall is not enough; aim for roughly 10 ft wide.
Do attachments change the storage size?
Yes. The bare tractor is length not captured long, 53.5 in wide and height not captured tall; a loader, mower deck, ballast box or rear implement can push the parked size past those numbers.
How much maneuvering room should I allow?
If attachments stay fitted, maneuvering room must be based on the attached length, not just the length not captured bare tractor length and 47.9 in wheelbase.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
