The John Deere Z925A tractor hydraulic pump flow is 18.2 GPM.
Hydraulic pump flow18.2 GPM
Implement flow18.2 GPM
Total hydraulic flow18.2 GPM
Hydraulic fluid capacity2.9 qt (0.7 gal)
John Deere Z925A Hydraulic Flow Details
Hydraulic pump flow
18.2 GPM
Implement hydraulic flow
18.2 GPM
Total hydraulic flow
18.2 GPM
Hydraulic fluid capacity
2.9 qt (0.7 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
18.2 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
18.2 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
18.2 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic fluid capacity comparison
This model
0.7 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere Z925A Extra Hydraulic Notes
Hydraulic flow note
The John Deere Z925A’s implement flow figure is about 18.2 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (18.2 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere Z925A is 2.9 qt (0.7 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
