The John Deere Z445 tractor hydraulic pump flow is 28.5 GPM, and hydraulic system pressure is 1,000 psi.
Hydraulic pump flow28.5 GPM
Implement flow28.5 GPM
Total hydraulic flow4.7 GPM
Hydraulic pressure1,000 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity2.5 qt (0.6 gal)
John Deere Z445 Hydraulic Flow Details
Hydraulic pump flow
28.5 GPM
Implement hydraulic flow
28.5 GPM
Total hydraulic flow
4.7 GPM
Hydraulic system pressure
1,000 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
2.5 qt (0.6 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
28.5 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
28.5 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
4.7 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
1,000 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
0.6 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere Z445 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere Z445 is 28.5 GPM implement flow; that points toward multiple SCVs, larger implements and heavier hydraulic demand.
Hydraulic pressure note
The John Deere Z445’s hydraulic pressure is listed at 1,000 psi, which is lower-pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (28.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere Z445 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere Z445 is 2.5 qt (0.6 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
