The John Deere X738 tractor hydraulic pump flow is 5.5 GPM, and hydraulic system pressure is 3,000 psi.
Hydraulic pump flow5.5 GPM
Implement flow6 GPM
Total hydraulic flow6 GPM
Hydraulic pressure3,000 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity5.5 gal
John Deere X738 Hydraulic Flow Details
Hydraulic pump flow
5.5 GPM
Implement hydraulic flow
6 GPM
Total hydraulic flow
6 GPM
Hydraulic system pressure
3,000 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
5.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
5.5 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
6 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
6 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
3,000 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
5.5 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere X738 Extra Hydraulic Notes
Hydraulic flow note
The John Deere X738’s implement flow figure is about 6 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
The John Deere X738’s hydraulic pressure is listed at 3,000 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (6 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere X738: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
The John Deere X738’s hydraulic fluid capacity is listed as 5.5 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
