Quick answer:
The John Deere X116R tractor hydraulic pump flow is 18.2 GPM, and hydraulic system pressure is 2,500 psi.
Hydraulic pump flow18.2 GPM
Implement flow10.2 GPM
Total hydraulic flow10.2 GPM
Hydraulic pressure2,500 psi
Hydraulic system typeopen-center
John Deere X116R Hydraulic Flow Details
| Hydraulic pump flow | 18.2 GPM |
|---|---|
| Implement hydraulic flow | 10.2 GPM |
| Total hydraulic flow | 10.2 GPM |
| Hydraulic system pressure | 2,500 psi |
| Hydraulic system type | open-center |
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
Implement hydraulic flow comparison
Total hydraulic flow comparison
Hydraulic pressure comparison
John Deere X116R Extra Hydraulic Notes
| Hydraulic flow note | For hydraulic work, the key number on the John Deere X116R is 10.2 GPM implement flow; that points toward normal loader use, small hydraulic implements and general utility work. |
|---|---|
| Hydraulic pressure note | Hydraulic pressure on the John Deere X116R is 2,500 psi, but hydraulic performance depends on pressure and flow together. |
| Rear remotes / SCV note |
|
| Hydraulic system type note | The John Deere X116R uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration. |
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.







