The John Deere LA110 tractor hydraulic pump flow is 3.5 GPM, and hydraulic system pressure is 1,850 psi.
Hydraulic pump flow3.5 GPM
Implement flow4.5 GPM
Total hydraulic flow4.5 GPM
Hydraulic pressure1,850 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity2.5 qt (0.6 gal)
John Deere LA110 Hydraulic Flow Details
Hydraulic pump flow
3.5 GPM
Implement hydraulic flow
4.5 GPM
Total hydraulic flow
4.5 GPM
Hydraulic system pressure
1,850 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
2.5 qt (0.6 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
3.5 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
4.5 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
4.5 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
1,850 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
0.6 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere LA110 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere LA110 is 4.5 GPM implement flow; that points toward loader work, steering and simple implements, but not high-demand continuous hydraulic attachments.
Hydraulic pressure note
Hydraulic pressure on the John Deere LA110 is 1,850 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (4.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere LA110 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere LA110 is 2.5 qt (0.6 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
