The John Deere F911 tractor hydraulic pump flow is 28.5 GPM, and hydraulic system pressure is 2,000 psi.
Hydraulic pump flow28.5 GPM
Implement flow28.5 GPM
Total hydraulic flow11.9 GPM
Hydraulic pressure2,000 psi
John Deere F911 Hydraulic Flow Details
Hydraulic pump flow
28.5 GPM
Implement hydraulic flow
28.5 GPM
Total hydraulic flow
11.9 GPM
Hydraulic system pressure
2,000 psi
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
28.5 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
28.5 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
11.9 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,000 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
John Deere F911 Extra Hydraulic Notes
Hydraulic flow note
The John Deere F911’s implement flow figure is about 28.5 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
The John Deere F911’s hydraulic pressure is listed at 2,000 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (28.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
