The John Deere 9560RT tractor hydraulic pump flow is 78 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow78 GPM
Implement flow48 GPM
Total hydraulic flow48 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity48 gal
John Deere 9560RT Hydraulic Flow Details
Hydraulic pump flow
78 GPM
Implement hydraulic flow
48 GPM
Total hydraulic flow
48 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
48 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
78 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
48 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
48 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
48 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 9560RT Extra Hydraulic Notes
Hydraulic flow note
With about 48 GPM implement flow, the John Deere 9560RT sits in the very high-flow hydraulic range and is best suited to large hydraulic implements and high-demand farm equipment where SCV flow matters.
Hydraulic pressure note
At 2,900 psi, the John Deere 9560RT’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (48 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 9560RT uses a closed-center pressure-flow compensated hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 9560RT is 48 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
