The John Deere 9460R tractor hydraulic pump flow is 44 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow44 GPM
Implement flow48 GPM
Total hydraulic flow48 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeopen-center
John Deere 9460R Hydraulic Flow Details
Hydraulic pump flow
44 GPM
Implement hydraulic flow
48 GPM
Total hydraulic flow
48 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
open-center
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
44 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
48 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
48 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
John Deere 9460R Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 9460R is 48 GPM implement flow; that points toward large hydraulic implements and high-demand farm equipment where SCV flow matters.
Hydraulic pressure note
The John Deere 9460R’s hydraulic pressure is listed at 2,900 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
For hydraulic implements, match the implement to the available hydraulic flow (48 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 9460R’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
