The John Deere 8130 tractor hydraulic pump flow is 44 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow44 GPM
Implement flow33.5 GPM
Total hydraulic flow33.5 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity9.5 gal
John Deere 8130 Hydraulic Flow Details
Hydraulic pump flow
44 GPM
Implement hydraulic flow
33.5 GPM
Total hydraulic flow
33.5 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
9.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
44 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
33.5 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
33.5 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
9.5 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 8130 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 8130 is 33.5 GPM implement flow; that points toward multiple SCVs, larger implements and heavier hydraulic demand.
Hydraulic pressure note
Hydraulic pressure on the John Deere 8130 is 2,900 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (33.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 8130 uses a closed-center pressure-flow compensated hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
For maintenance, the John Deere 8130’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
