The John Deere 7700 tractor hydraulic pump flow is 25.4 GPM, and hydraulic system pressure is 3,046 psi.
Hydraulic pump flow25.4 GPM
Implement flow25.4 GPM
Total hydraulic flow25.4 GPM
Hydraulic pressure3,046 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity10.5 gal
John Deere 7700 Hydraulic Flow Details
Hydraulic pump flow
25.4 GPM
Implement hydraulic flow
25.4 GPM
Total hydraulic flow
25.4 GPM
Hydraulic system pressure
3,046 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
10.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
25.4 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
25.4 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
25.4 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
3,046 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
10.5 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 7700 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 7700 is 25.4 GPM implement flow; that points toward multiple SCVs, larger implements and heavier hydraulic demand.
Hydraulic pressure note
The John Deere 7700’s hydraulic pressure is listed at 3,046 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (25.4 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 7700’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
The John Deere 7700’s hydraulic fluid capacity is listed as 10.5 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
