The John Deere 7505 tractor hydraulic pump flow is 17.4 GPM, and hydraulic system pressure is 2,756 psi.
Hydraulic pump flow17.4 GPM
Implement flow12.5 GPM
Total hydraulic flow17.4 GPM
Hydraulic pressure2,756 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity16.9 gal
John Deere 7505 Hydraulic Flow Details
Hydraulic pump flow
17.4 GPM
Implement hydraulic flow
12.5 GPM
Total hydraulic flow
17.4 GPM
Hydraulic system pressure
2,756 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
16.9 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
17.4 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
12.5 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
17.4 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,756 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
16.9 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 7505 Extra Hydraulic Notes
Hydraulic flow note
For attachments, the John Deere 7505’s implement hydraulic flow matters more than total flow. The listed gap is about 4.9 GPM between implement flow and total flow.
Hydraulic pressure note
Hydraulic pressure on the John Deere 7505 is 2,756 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (12.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 7505 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 7505 is 16.9 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
