The John Deere 7410 tractor hydraulic pump flow is 16 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow16 GPM
Implement flow26 GPM
Total hydraulic flow26 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity20 qt (5 gal)
John Deere 7410 Hydraulic Flow Details
Hydraulic pump flow
16 GPM
Implement hydraulic flow
26 GPM
Total hydraulic flow
26 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
20 qt (5 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
16 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
26 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
26 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
5 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 7410 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 7410’s implement flow figure is about 26 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
At 2,900 psi, the John Deere 7410’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (26 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 7410: closed-center pressure-flow compensated affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
The John Deere 7410’s hydraulic fluid capacity is listed as 20 qt (5 gal); check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
