The John Deere 5400 tractor hydraulic pump flow is 11.4 GPM, and hydraulic system pressure is 2,750 psi.
Hydraulic pump flow11.4 GPM
Implement flow18.2 GPM
Total hydraulic flow18.2 GPM
Hydraulic pressure2,750 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity10 gal
John Deere 5400 Hydraulic Flow Details
Hydraulic pump flow
11.4 GPM
Implement hydraulic flow
18.2 GPM
Total hydraulic flow
18.2 GPM
Hydraulic system pressure
2,750 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
10 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
11.4 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
18.2 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
18.2 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,750 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
10 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 5400 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 5400 is 18.2 GPM implement flow; that points toward larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
At 2,750 psi, the John Deere 5400’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (18.2 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 5400: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 5400 is 10 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
