The John Deere 2140 tractor hydraulic pump flow is 23 GPM, and hydraulic system pressure is 2,466 psi.
Hydraulic pump flow23 GPM
Implement flow12.4 GPM
Total hydraulic flow12.4 GPM
Hydraulic pressure2,466 psi
John Deere 2140 Hydraulic Flow Details
Hydraulic pump flow
23 GPM
Implement hydraulic flow
12.4 GPM
Total hydraulic flow
12.4 GPM
Hydraulic system pressure
2,466 psi
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
23 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
12.4 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
12.4 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,466 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
John Deere 2140 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 2140 is 12.4 GPM implement flow; that points toward normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
The John Deere 2140’s hydraulic pressure is listed at 2,466 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (12.4 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
