The John Deere 950 tractor hydraulic pump flow is 9 GPM, and hydraulic system pressure is 2,030 psi.
Hydraulic pump flow9 GPM
Implement flow10.6 GPM
Total hydraulic flow10.6 GPM
Hydraulic pressure2,030 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity18 L (4.8 gal)
John Deere 950 Hydraulic Flow Details
Hydraulic pump flow
9 GPM
Implement hydraulic flow
10.6 GPM
Total hydraulic flow
10.6 GPM
Hydraulic system pressure
2,030 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
18 L (4.8 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
9 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
10.6 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
10.6 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,030 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
4.8 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 950 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 950 is 10.6 GPM implement flow; that points toward normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
The John Deere 950’s hydraulic pressure is listed at 2,030 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (10.6 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 950: closed-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 950 is 18 L (4.8 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
