The John Deere 345 tractor hydraulic pump flow is 35 GPM, and hydraulic system pressure is 2,100 psi.
Hydraulic pump flow35 GPM
Implement flow9.5 GPM
Total hydraulic flow9.5 GPM
Hydraulic pressure2,100 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity4.7 qt (1.2 gal)
John Deere 345 Hydraulic Flow Details
Hydraulic pump flow
35 GPM
Implement hydraulic flow
9.5 GPM
Total hydraulic flow
9.5 GPM
Hydraulic system pressure
2,100 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
4.7 qt (1.2 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
35 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
9.5 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
9.5 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,100 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
1.2 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 345 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 345 should be matched to implements that fit its 9.5 GPM hydraulic-flow range.
Hydraulic pressure note
At 2,100 psi, the John Deere 345’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (9.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 345: closed-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
For maintenance, the John Deere 345’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
