The John Deere 7210R tractor hydraulic pump flow is 59 GPM, and hydraulic system pressure is 2,958 psi.
Hydraulic pump flow59 GPM
Implement flow26 GPM
Total hydraulic flow43 GPM
Hydraulic pressure2,958 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity42.3 gal
John Deere 7210R Hydraulic Flow Details
Hydraulic pump flow
59 GPM
Implement hydraulic flow
26 GPM
Total hydraulic flow
43 GPM
Hydraulic system pressure
2,958 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
42.3 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
59 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
26 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
43 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,958 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
42.3 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 7210R Extra Hydraulic Notes
Hydraulic flow note
The John Deere 7210R’s total flow is higher than implement flow, so use the implement-flow number when matching hydraulic tools and SCV-driven equipment.
Hydraulic pressure note
The John Deere 7210R’s hydraulic pressure is listed at 2,958 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (26 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 7210R uses a closed-center pressure-flow compensated hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
For maintenance, the John Deere 7210R’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
