The John Deere 6610 tractor hydraulic pump flow is 16.6 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow16.6 GPM
Implement flow16.6 GPM
Total hydraulic flow16.6 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity16.6 gal
John Deere 6610 Hydraulic Flow Details
Hydraulic pump flow
16.6 GPM
Implement hydraulic flow
16.6 GPM
Total hydraulic flow
16.6 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
16.6 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
16.6 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
16.6 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
16.6 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
16.6 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 6610 Extra Hydraulic Notes
Hydraulic flow note
With about 16.6 GPM implement flow, the John Deere 6610 sits in the utility tractor hydraulic range and is best suited to larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
The John Deere 6610’s hydraulic pressure is listed at 2,900 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (16.6 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 6610: closed-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 6610 is 16.6 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
