The John Deere 6525 tractor hydraulic pump flow is 14.3 GPM, and hydraulic system pressure is 435 psi.
Hydraulic pump flow14.3 GPM
Implement flow14.3 GPM
Total hydraulic flow14.3 GPM
Hydraulic pressure435 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity10.3 gal
John Deere 6525 Hydraulic Flow Details
Hydraulic pump flow
14.3 GPM
Implement hydraulic flow
14.3 GPM
Total hydraulic flow
14.3 GPM
Hydraulic system pressure
435 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
10.3 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
14.3 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
14.3 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
14.3 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
435 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
10.3 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 6525 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 6525 is 14.3 GPM implement flow; that points toward larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
Hydraulic pressure on the John Deere 6525 is 435 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (14.3 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6525’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Hydraulic fluid capacity note
The John Deere 6525’s hydraulic fluid capacity is listed as 10.3 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
