The John Deere 6210R tractor hydraulic pump flow is 31.1 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow31.1 GPM
Implement flow31.1 GPM
Total hydraulic flow31.1 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity94 qt (23.5 gal)
John Deere 6210R Hydraulic Flow Details
Hydraulic pump flow
31.1 GPM
Implement hydraulic flow
31.1 GPM
Total hydraulic flow
31.1 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
94 qt (23.5 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
31.1 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
31.1 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
31.1 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
23.5 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 6210R Extra Hydraulic Notes
Hydraulic flow note
The John Deere 6210R’s implement flow figure is about 31.1 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
The John Deere 6210R’s hydraulic pressure is listed at 2,900 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (31.1 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6210R uses a closed-center pressure-flow compensated hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
The John Deere 6210R’s hydraulic fluid capacity is listed as 94 qt (23.5 gal); check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
