The John Deere 6110E tractor hydraulic pump flow is 21.1 GPM, and hydraulic system pressure is 2,756 psi.
Hydraulic pump flow21.1 GPM
Implement flow21.1 GPM
Total hydraulic flow21.1 GPM
Hydraulic pressure2,756 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity25.4 gal
John Deere 6110E Hydraulic Flow Details
Hydraulic pump flow
21.1 GPM
Implement hydraulic flow
21.1 GPM
Total hydraulic flow
21.1 GPM
Hydraulic system pressure
2,756 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
25.4 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
21.1 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
21.1 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
21.1 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,756 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
25.4 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 6110E Extra Hydraulic Notes
Hydraulic flow note
The John Deere 6110E’s implement flow figure is about 21.1 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
The John Deere 6110E’s hydraulic pressure is listed at 2,756 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (21.1 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6110E’s hydraulic system type is closed-center pressure-flow compensated, which is more advanced and better suited to variable hydraulic demand.
Hydraulic fluid capacity note
The John Deere 6110E’s hydraulic fluid capacity is listed as 25.4 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
